Shipboard Habitability Improvement Program
COMNAVSURFPAC
Description of Project Types
| Berthing Projects: | |
| BCPO - Complete Upgrade of Chief Petty Officer's (CPO) Berthing Compartment(s) | |
| BENL - Complete Upgrade of Crew Berthing Compartment(s) | |
| BMSG - Complete Upgrade of STNCO Berthing Compartment(s) | |
| BTRM - Complete Upgrade of Troop Berthing Compartment(s) | |
| BOFF - Complete Upgrade of Officer Stateroom(s) | |
| Sanitary Projects: | |
| HCPO - Complete Upgrade of Chief Petty Officer's (CPO) Sanitary Space(s) | |
| HENL - Complete Upgrade of Crew Sanitary Space(s) | |
| HMSG - Complete Upgrade of STNCO Sanitary Space(s) | |
| HTRP - Complete Upgrade of Troop Sanitary Space(s) |
- BCPO INSTALLATION REQUIREMENTS:
- Replace berths with CPO modular berths with privacy partitions and berth curtains arranged in six-person cubicles, as practical, with ten percent long berths. Total number of new berths will be equal to the existing berthing.
- Redistribute air supply terminals to provide overhead diffusers within each berth cubicle.
- Redistribute overhead lighting to conform to new arrangements. Provide one berth light per accommodation and mirror lights as required.
- Improve traffic flow and privacy, as practical, through the arrangement of furniture.
- Provide lockers for stowage of clothing and personal effects to meet or exceed minimums required per accommodations. For CPO (E7-E9) provide 14 cubic feet of locker space, 18 inches hanging space and 0.75 cubic feet of soiled laundry stowage.
- Provide a means of secondary egress if one does not exist and berthing capacity exceeds 21 personnel.
- Provide recreation/lounge area in berthing compartments segregated from sleeping area to the maximum extent feasible.
- Provide storage for iron and ironing board.
- Provide bulletin boards, watch-quarter boards and mirrors.
- Prepare and preserve decks, bulkheads and overheads.
- Replace deck covering.
- Replace any damaged insulation.
- Paint bulkheads and overheads.
- BENL INSTALLATION REQUIREMENTS:
- Replace berths with modular berths with privacy partitions and berth curtains arranged in six-person cubicles, as practical, with ten percent long berths. Total number of new berths will be equal to the existing berthing.
- Redistribute air supply terminals to provide overhead diffusers within each berth cubicle.
- Redistribute overhead lighting to conform to new arrangements.
- Provide one berth light per accommodation and mirror lights as required.
- Improve traffic flow and privacy, as practical, through the arrangement of furniture.
- Provide lockers for stowage of clothing and personal effects to meet or exceed reference (a).
- Provide a means of secondary egress if one does not exist and berthing capacity exceeds 21 personnel.
- Provide recreation/lounge area in berthing compartments segregated from sleeping area to the maximum extent feasible.
- Provide bulletin boards, watch-quarter boards and mirrors.
- Prepare and preserve decks, bulkheads and overheads.
- Replace deck covering.
- Replace any damaged insulation.
- Paint bulkheads and overheads.
- BMSG INSTALLATION REQUIREMENTS:
- Replace berths with CPO style berths with privacy partitions and berth curtains arranged in six-man cubicles, as practical, with ten percent long berths. Total number of new berths will be equal to the existing berthing.
- Redistribute air supply terminals to provide overhead diffusers for each berth cubicle and modify recirculation system ducting to suit.
- Redistribute overhead lighting to conform to new arrangements. Provide one berth light per accommodation and mirror lights as required.
- Improve traffic flow and privacy, as practical, through the arrangement of furniture.
- Provide lockers for stowage of clothing and personal effects to meet or exceed minimums required per accommodation in accordance with reference (a).
- Provide a means of secondary egress if one does not exist and berthing capacity exceeds 21 personnel.
- Provide recreation/lounge area in berthing compartment segregated from sleeping area to the maximum extent feasible
- Relocate existing rifle racks and helmet racks to suit new furniture and arrangements, if applicable.
- Provide adequate facilities for field pack stowage.
- Provide stowage for iron and ironing board.
- Provide bulletin boards, watch-quarter boards and mirrors.
- Prepare and preserve decks, bulkheads and overheads.
- Replace deck covering.
- Replace any damaged insulation.
- Paint overheads and bulkheads.
- BTRM INSTALLATION REQUIREMENTS:
- Replace berths with modular berths with privacy partitions and berth curtains arranged in six-person cubicles, as practical, with ten percent long berths. Total number of new berths will be equal to existing berthing.
- Redistribute air supply terminals to provide overhead diffusers for each berth cubicle and modify recirculation system ducting to suit.
- Redistribute overhead lighting to conform to new arrangements. Provide one berth light per accommodation and mirror lights as required.
- Improve traffic flow and privacy, as practical, through the arrangement of furniture.
- Provide lockers for stowage of clothing and personal effects to meet or exceed minimums required per accommodation in accordance with reference (a).
- Provide a means of secondary egress if one does not exist and berthing capacity exceeds 21 personnel.
- Provide recreation/lounge area in berthing compartment segregated from sleeping area to the maximum extent feasible.
- Relocate existing rifle racks and helmet racks to suit new furniture and arrangements, if applicable.
- Provide adequate facilities for field pack stowage.
- Provide stowage for iron and ironing board.
- Provide bulletin boards, watch-quarter boards and mirrors.
- Prepare and preserve decks, bulkheads and overheads.
- Replace deck covering.
- Replace any damaged insulation.
- Paint overheads and bulkheads.
- BOFF INSTALLATION REQUIREMENTS:
- Replace berths. Total number of new berths shall be equal to the number of existing berth accommodations. One man or two man berths will be a new replacement, and 3-man berths will be an improved full width unit with privacy curtains.
- Improve traffic flow and privacy, as practical, through the arrangement of furniture.
- Provide secretaries and lockers for stowage of clothing and personal effects to meet or exceed minimums required per accommodation in accordance with reference (a). Secretaries include a new safe.
- Provide stainless steel sink unit with storage space above and below sink and with improved faucet and drain components.
- Provide chairs.
- Replace joiner doors.
- Provide accessories and additional shelves, working surfaces and stowage as feasible.
- Replace ventilation diffusers, and as feasible improve distribution of air.
- Redistribute overhead lighting to conform to new arrangements. Provide one berth light per accommodation and mirror lights at each sink. Lights within secretaries will include a receptacle.
- Prepare and preserve decks, bulkheads and overheads.
- Replace deck covering.
- Replace any damaged insulation.
- Paint overheads and bulkheads.
- HCPO INSTALLATION REQUIREMENTS:
- Remove and replace fixtures in quantities to meet habitability standards.
- Rearrange to provide required clearances, privacy and access.
- Install new Stainless Steel countertop lavatory units.
- Install new Stainless Steel water closet partitions supported from the overhead and bulkhead.
- Install new Stainless Steel urinal supports and dividers, if applicable.
- Install new Stainless Steel shower partitions and, if space permits, drying areas.
- Install new accessories.
- Replace joiner doors.
- Replace electrical heaters.
- Install cleaning gear locker and service sink or bucket fill area with garden hose connection where practical.
- Modify piping to suit new arrangement and replace any deteriorated piping.
- Modify the ventilation distribution system for efficiency and to suit new arrangement.
- As space permits, either enclose or insulate any water heater located within space.
- Install improved lighting and receptacles to accommodate the new arrangement.
- Install new porcelain tile deck covering.
- Prepare and paint the sanitary space.
- HENL INSTALLATION REQUIREMENTS:
- Remove and replace fixtures in quantities to meet habitability standards.
- Rearrange to provide required clearances, privacy and access.
- Install new Stainless Steel countertop lavatory units.
- Install new Stainless Steel water closet partitions supported from the overhead and bulkhead.
- Install new Stainless Steel urinal supports and dividers, if applicable.
- Install new Stainless Steel shower partitions and, if space permits, drying areas.
- Install new accessories.
- Replace joiner doors.
- Replace electrical heaters.
- Install cleaning gear locker and service sink or bucket fill area with garden hose connection where practical.
- Modify piping to suit new arrangement and replace any deteriorated piping.
- Modify the ventilation distribution system for efficiency and to suit new arrangement.
- As space permits, either enclose or insulate any water heater located within space.
- Install improved lighting and receptacles to accommodate the new arrangement.
- Install new porcelain tile deck covering.
- Prepare and paint the sanitary space.
- HMSG INSTALLATION REQUIREMENTS:
- Remove and replace fixtures in quantities to meet habitability standards.
- Rearrange to provide required clearances, privacy and access.
- Install new Stainless Steel countertop lavatory units.
- Install new Stainless Steel water closet partitions supported from the overhead and bulkhead.
- Install new Stainless Steel urinal supports and dividers, if applicable.
- Install new Stainless Steel shower partitions and, if space permits, drying areas.
- Install new accessories.
- Replace joiner doors.
- Replace electrical heaters.
- Install cleaning gear locker and service sink or bucket fill area with garden hose connection where practical.
- Modify piping to suit new arrangement and replace any deteriorated piping.
- Modify the ventilation distribution system for efficiency and to suit new arrangement.
- As space permits, either enclose or insulate any water heater located within space.
- Install improved lighting and receptacles to accommodate the new arrangement.
- Install new porcelain tile deck covering.
- Prepare and paint the sanitary space.
- HTRP INSTALLATION REQUIREMENTS:
- Remove and replace fixtures in quantities to meet habitability standards.
- Rearrange to provide required clearances, privacy and access.
- Install new Stainless Steel countertop lavatory units.
- Install new Stainless Steel water closet partitions supported from the overhead and bulkhead.
- Install new Stainless Steel urinal supports and dividers, if applicable.
- Install new Stainless Steel shower partitions and, if space permits, drying areas.
- Install new accessories.
- Replace joiner doors.
- Replace electrical heaters.
- Install cleaning gear locker and service sink or bucket fill area with garden hose connection where practical.
- Modify piping to suit new arrangement and replace any deteriorated piping.
- Modify the ventilation distribution system for efficiency and to suit new arrangement.
- As space permits, either enclose or insulate any water heater located within space.
- Install improved lighting and receptacles to accommodate the new arrangement.
- Install new porcelain tile deck covering.
- Prepare and paint the sanitary space.